Tuesday, August 11, 2009

PCD Countersinks target composite material applications.



Specially designed for cutting highly abrasive materials, PCD Countersinks allow for accurate forming of holes. Units with interchangeable pilot enable replacement of damaged pilots or substitution of various pilot diameters. They come in body diameters from 3/8 to 1 ¼ in. For constant hole diameters, PCD Countersinks with integral pilot come in body diameters of 3/8 and ½ in. as well as 10, 12, 14, and 17 mm. Both types have countersink angle of 100/130°.
Telcon Ltd, a designer and manufacturer of polycrystalline diamond (PCD) tipped cutting tools, has launched its new, improved line of PCD countersinks for composite material applications. They are specially designed for cutting highly abrasive materials.The PCD countersinks design allows for accurate forming of holes and provides longer life and better hole quality."Today's composite materials can only be machined economically with PCD precision tools because high speed steel does not perform satisfactorily," said John Eisner, export manager, Telcon. "Telcon PCD countersinks are a high quality product and a cost-efficient solution because of the long service life PCD offers." Telcon offers PCD countersinks with interchangeable pilot and PCD countersinks with integral pilot. PCD countersinks with interchangeable pilot allow for replacement of damaged pilots or substitution of various pilot diameters with the same countersink. They come in various body diameters from 3/8-inch to 1 ¼-inches. The countersink angle is 100/130 degrees. PCD Countersinks with integral pilot are a permanent pilot for constant hole diameters. They come in body diameters of 3/8-inch and ½-inch and 10, 12, 14, and 17 millimeters. The countersink angle is 100/130 degrees.Telcon Ltd., a leading manufacturer of polycrystalline diamond (PCD) and cubic boron nitride tipped cutting tools, markets to the woodworking, automotive and aerospace airframe and composite material machining industries. Telcon offers a diverse range of PCD tipped diamond tools, inserts, countersinks, routers, router bits, ball end mills, straight end mills, profile cutters, T-slots, combined drills, reamers, rabbeting cutters and drills. They are equipped with wire EDM grinding and cutting, EDG grinding and CNC grinding and eroding machinery. Telcon is ISO certified, has strict quality assurance controls and follows European standards.For additional information on Telcon Ltd., please visit www.telcon.co.il; e-mail Telcon@telcon.co.il; or contact Telcon, 2 Hamal Street, P.O. Box 1068, Industrial Park North, Afula 18110 ISRAEL. www.telconpcd.comPlease send all inquiries to: john@telcon.co.il

2 comments:

Anonymous said...

I think, that you are not right. I am assured. I suggest it to discuss. Write to me in PM, we will communicate.

Anonymous said...

I was very pleased to find this site.I wanted to thank you for this great read!! I definitely enjoying every little bit of it and I have you bookmarked to check out new stuff you post.